- PE PROTECTIVE FILM
- 50 Products
- Product Image
- Product Name
- FOB Price
- Model NO.: DM(022)
- Type: Protective Film
- Hardness: Soft
- Manufacturer: Tamay
- Function: Transfer
- Specification: customer size is available
- HS Code: 4811
- Material: PE
- Transparency: Transparent
- Molding method: Blow Molding
- Certificate: ISO9001, ISO14001, SGS
- Trademark: Tamay
- Origin: China
Standard size: 1.22M*100M width*length
Peeling strength: 100G~200G/cm
Size: (950-2100)mm x (1000/1500)m x (0.07-0.08)mm
(width x length x thickness)
Peeling strength; 100g-200g/cm
Unbleached parchment. Printing logo is available upon customer's requirement.
Plz notice that we have changed the company name from "Guangdong Tamay Adhesive Product Co., Ltd. " to "Guangdong Tamay New Materials Co., Ltd. " since December 17th 2010.
APPLICATION OF APPLICATION PAPER
Preferably the application paper should be applied by mechanical means. But results are obtained at a temperature not above 60ºC.
Adhesive properties are susceptible to change due to following parameters: chemical state of the surface to be protected; presences of impurities within or on the substrates; adhesive surface over touching with solvent directly.
The application paper can be stored for six months, in its original packaging and dry conditions and the paper should be applied within 6 months from the date of delivery and for 6 months outdoor applications. The rolls should be protected from extremes of temperature and direct sunlight & UV light. Out of its containers, the application paper should be protected against dust and other impurities.
Tests should be conducted under actual applications conditions.
Base material: Parchment
Color: Unbleached Parchment
Type of Adhesive: Rubber Adhesive
Heat Resistance: 60ºC& 6 hours without glue residue
|Color||Thickness (Micron, by Average)||180° Peel Strength (g/cm, by Average)||Elongation at Break in lengthways||Elongation at Break in crosswise|
The information contained herein is typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control.